AGA-53 Angular Gripper - 180° Three Jaw

Design: 3-Jaw Angular

Stroke: 0-180° Adjustable

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 200 lbs [888 N]
Open: 170 lbs [758 N]

Time:
Close: 0.4 sec [0.4 sec]
Open: 0.4 sec [0.4 sec]

Pressure Range:
Low/High 10-120 PSI [.7-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Repeatability from Center: ± 0.002 [.06 mm]

Loading Capacity: Static - Dynamic

Max Tensile T
1200 lbs - 400 lbs
[5330 N] - [1780 N]

Max Compressive C
1200 lbs - 400 lbs
[5330 N] - [1780 N]

Max Moment Mx
930 in/lb - 310 in/lb
[105 Nm] - [35 Nm]

Max Moment My
880 in/lb - 276 in/lb
[99.5 Nm] - [31.2 Nm]

Max Moment Mz
880 in/lb - 276 in/lb
[99.5 Nm] - [31.2 Nm]

Material: High Strength, Hard Coated
aluminum bronze alloys, Steel

Weight: 8 lb [3.6 kg]

Piston Diameter: 2.25 in [57.2 mm]

• Grippers provide up to 180º of angular jaw travel allowing the jaws to completely retract from the work area eliminating another required axis of travel.
• High gripping force to weight ratio.
• Compact design with long, adjustable stroke.
• Jaw rotations can be adjusted from 0-90º to allow the gripper to be custom fit to each application.
• Units are permanently lubricated for non-lube air operation, allowing for compliance with OSHA regulation.
• Proximity sensors are available to monitor open and closed position of the jaws.
• AGA is fully field repairable for cost savings and minimum down time.
• The gripper body has two mounting surfaces with dowel pin holes to provide accurate mounting in a variety of positions.