AGA-40 Double-Guided Low Profile Angular Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Angular

Stroke: 0-180° adj

Gripping Force @ 80 PSI
Closing: 180lbs
Opening: 168lbs

Time:
Close: 0.2 sec.
Open: 0.2 sec.

Pressure Range:
Low: 10 PSI
High: 120 PSI

Temperature Range:
Low: -20°F
High: 180°F

Side Play: ±0.001

Repeatability from center: ±.002

Loading Capacity: Static Dynamic
Maximum Tensile T
........... 90 lbs. 40 lbs.
Maximum Compressive C
........... 90 lbs. 40 lbs.
Maximum Moment Mx
........... 150 in.-lbs. 40 in.-lbs.
Maximum Moment My
........... 180 in.-lbs. 45 in.-lbs.
Maximum Moment Mz
........... 150 in.-lbs. 40 in.-lbs.

Displacement 3.2 cu in

Material:
High Strength,
Hard Coated
Aluminum Alloys, Steel

Weight: 2.25 lbs

Piston Diameter: 1.5 in

• Grippers provide up to 180º of angular jaw travel allowing the jaws to completely retract from the work area eliminating another required axis of travel.
  
• High gripping force to weight ratio.
  
• Compact design with long stroke.
  
• Jaw rotations can be adjusted from 0-90º to allow the gripper to be custom fit to each application.
  
• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulation.
  
• Pistons seals are quad ring type for long service life.
  
• Proximity sensors are available to monitor open and closed position of the jaws.
  
• AGA is fully field repairable for cost savings and minimum down time.
  
• The gripper body has two mounting surfaces with dowel pin holes to provide accurate mounting in a variety of positions.