AGA-50 Double-Guided Low Profile Angular Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Angular

Stroke: 0-180°

Gripping Force per Jaw @ 80psi: Closing = 1400 lbs.; Opening = 1350 lbs.

Time: Close = 0.5 sec.; Open = 0.5 sec.

Pressure Range: Low = 10 psi; High = 120 psi

Temperature Range: Low = -20°F; High = 180°F

Side Play: +/- 0.001"

Loading Capacity:
Maximum Tensile T..........1200lbs.
Maximum Comressive C...1200lbs.
Maximum Moment Mx......930in/lb
Maximum Moment My......880in/lb
Maximum Moment Mz......880in/lb

Displacement: 8.56 cubic inch

Material: High strength, hard coated aluminum bronze alloys and steel

Weight: 13 lbs.

Piston Diameter: 2.25"

• Grippers provide up to 180 degrees of angular jaw travel allowing the grippers to completely retract from the work area eliminating another required axis of travel.
  
• High gripping force to weight ratio.
  
• Compact design with large stroke..
  
• Jaw Rotations can be adjusted from 0-90 degrees to allow the gripper to be custom fit to each application.
  
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
  
• Piston seals are quad-ring type for long service life.
  
  
• The gripper body has two mounting surfaces with dowl pin holes to provide accurate mounting in a variety of positions.
  
  
• Proximity switches are available to monitor open and closed position of the jaws.
  
  
• Series AGA-50 is fully field repairable for cost savings and minimum down time.