AGS-5 Powered Slide

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Built-in air cylinder linear bearings on steel hardened shafts

Stroke: 5 inches max. 1" increments

Thrust Force @ 80psi: 50 lbs.

Recommended Speed: 14in/sec.

Air Consumption: 1,884 cubic inches/min

Pressure Range: Low = 30 psi; High = 120 psi

Temperature Range: Low = -20 F; High = 150 F

Side Play: +/- 0.001" throughout the stroke

Loading: 50 lbs.

Displacement: 3.92 cubic inch

Material: High strength, hard coated aluminum alloys and steel

Weight: 6.5 lbs.

Piston Diameter: 1.0"

• Compact lightweight unit with built-in air cylinder.
  
  
•  Linear ball bearings ride on precision hardened ground steel shafts.
  
  
•  Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
  
•  Piston seals are U-cup type for long service life.
  
  
•  Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing.
  
  
•  Custom mounting holes and air ports can be added. Please consult factory.
  
  
•  Main body or end blocks can be anchored due to the 1/16" height clearance.
  
  
•  Standard built-in stroke adjustment for precise, repetitive operation.
  
  
•  Proximity switches are available to monitor end of stroke position of the body.
  
  
•  Optional shock absorbers can be ordered for smooth operation.
  
  
•  Series AGS-5 is fully field repairable for cost savings and minimum down time. Repair kits are available for repairs or maintenance.