AGT-5 Powered Slide Linear Thruster

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Replacable air cylinder linear bearings on steel hardened shafts

Stroke: 12.0 inches Max (1” increments)

Thrust Force @ 80psi: 140 lbs. (Multiply forse factor by inout pressure in PSI)

Extend Force:    1.76lbs
Retract Force:   1.61lbs.

Recommended Speed: 1-40 in/sec.

Air Consumption: 4248 cubic inches/max stroke

Pressure Range: Low = 30 psi; High = 120 psi

Temperature Range: Low = -20 F; High = 150 F

Side Play: +/- 0.001" throughout the stroke

Loading: 40 lbs. Max.

Material: High strength, hard coated aluminum alloys and steel

Weight: 7.0 lbs. + 6.7 oz.

Shaft Diameter:  3/4”.

Piston Diameter: 1 -1/2"

• Compact lightweight unit with replacable air cylinder.
  
  
• Floating piston rod coupling eliminates cylinder binding..
  
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
  
• Optional stroke adjustment for precise, repetitive operation.
  
• Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing.
  
  
• Standard end plate to stop shaft vibrations.
  
  
• Proximity switches are available to monitor end of stroke position of the body.
  
  
• Optional shock absorbers can be ordered for smooth operation.
  
  
• Series AGT-5 is fully field repairable for cost savings and minimum down time. Repair kits are available for repairs or maintenance.