AGP-8-OR - Finger Gripper for Placing O-Rings,
T-Slot Bearing Series

Inch & Metric DWG 2D	PRODUCT PORTFOLIO	Inch Solid Works, 3D IGES, Step	Metric Solid Works, 3D, IGES & Step	PDF
DWG	AGP-8-OR	3D	3D	AGP-8 OR

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel, Double Acting, Synchronized Sealed Jaws

Stroke: Spread 1.10 in. adj. [27.9 mm]
Ejecting 0.55 in [13.9 mm]

Gripping Force Per Jaw @ 80 PSI [5.5 BAR]
Spreading Jaw: 200 lbs [889 N]
Ejector Jaw: 310 lbs [1378 N]

Time:
Close: 0.2 sec [0.2 sec]
Open: 0.2 sec [0.2 sec]

Pressure Range:
Low/High 30-100 PSI [2-7 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Repeatability from center:
± .002 [.06 mm]

Loading Capacity: Static - Dynamic

Max Tensile T
100 lbs 30 lbs
[445 N] [130 N]

Max Compressive C
100 lbs 30 lbs
[445 N] [130 N]

Max Moment Mx
200 in/lb 50 in/lb
[22 Nm] [6 Nm]

Max Moment My
230 in/lb 60 in/lb
[23 Nm] [6 Nm]

Max Moment Mz
200 in/lb 50 in/lb
[22 Nm] [6 Nm]

Material: High Strength,Hard Coated
aluminum bronze alloys, Steel

Weight: 8 lbs [3.6 Kg]

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
Spreading jaws and Ejector jaws have independent pistons to provide exact timing of O-ring placement.
Compact design with long adjustable stroke.
True parallel jaw motion for easy tooling.