AGW-3000 Parallel Grabber Brawn Series

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: 8-12 Inches

Gripping Force per Jaw @ 80psi: Closing = 1100 lbs.; Opening = 1120 lbs.

Time: Close = 0.5 sec.; Open = 0.5 sec.

Pressure Range: Low = 30 psi; High = 150 psi

Temperature Range: Low = -20°F; High = 180°F

Side Play: +/- 0.001"

Repeatability from Center: +/- 0.002"

Loading Capacity:
Max. tensile. T: 2500 lbs.
Max. Compressive C: 2500 lbs.
Max. Moment M_x:6000 in/lb
Max. Moment M_y:6000 in/lb
Max. Moment M_z:5500 in/lb

Material: High strength, hard coated aluminum alloys and steel

Displacement: 55.00 cubic inch

Material: High strength, hard coated aluminum alloys and steel

Weight: 57 lbs.

Piston Diameter: 2x3 Inches

• Ultra high gripping force to weight ratio due to two opposing independent pistons that direct power to the jaws.
  
• True parallel jaw motion for easy tooling.
  
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
  
• Piston seals are u-cup type for long service life.
  
  
• Four large jaw support shafts are guided through the width of the main body
  
  
• Proximity switches are available to monitor open and closed position of the jaws.
  
  
• Series AGW-3000 is fully field repairable for cost savings and minimum down time.
  
• Non-synchronous versions allows the gripper’s jaws to comply to the part’s centerline verses the gripper’s centerline.
  
• Strokes range from 8 - 12 inches to fit your application.
  
• Totally sealed unit repels contaminants.