AGLP-1 T-Slot Bearing Series Parallel Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: .025 in.

Gripping Force per Jaw @ 80psi: Closing = 10 lbs.; Opening = 10 lbs.

Time: Close = 0.12 sec.; Open = 0.12 sec.

Pressure Range: Low = 10 psi; High = 120 psi

Temperature Range: Low = -20°F; High = 180°F

Side Play: +/- 0.001"

Repeatability from Center: +/- 0.002"

Loading Capacity:
Max. tensile. T: 65 lbs.
Max. Compressive C: 65 lbs.
Max. Moment M_x: 60 in/lb
Max. Moment M_y: 60 in/lb
Max. Moment M_z: 60 in/lb

Material: High strength, hard coated aluminum alloys and steel

Displacement: .30 cubic inch

Material: High strength, hard coated aluminum alloys and steel

Weight: 2 oz

Piston Diameter: 0.625 in

• Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  
• High gripping force to weight ratio.
  
  
• Compact Design with long stroke.
  
  
• True parallel jaw motion for easy tooling.
  
• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
  
  
• Pison seals are quad ring type for long service life.
  
• Hall effect sensors are available to monitor open and closed positions of the jaws.
  
• AGLP is fully field repairable for cost savings and minimum down time.
  
• Gripper can be ordered with 2 different stroke on the same size body.