AGP-500 Double-Guided Wedge Parallel Gripper
Features & Benefits
- Ultra high gripping force to weight ratio.
- True parallel jaw motion for easy tooling.
- Totally sealed unit with air purge:
(i) Unit can be slightly pressurized to prevent debris or coolant from entering
(ii) A vacuum can be applied to evacuate any contaminants from inside the unit in a clean room environment - Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
- Piston seals are quad-ring type for long service life.
- Additional side mounting holes and side air ports for optional mounting and porting.
- Optional stroke adjustment for operating in tiht places.
- Proximity switches are available to monitor open and closed position of the jaws.
- Series AGP-500 is fully field repairable for cost savings and minimum down time.
PRODUCT SPECIFICATIONS
Design: Parallel, Double Acting, Synchronized Jaws
Stroke: 0.50 in [12.7 mm]
Gripping Force @ 80 PSI [5.5 bar]:
Closing: 37 lbs [164 N]
Opening: 40 lbs [178 N]
Time:
Close: 0.2 sec [0.2 sec]
Open: 0.2 sec [0.2 sec]
Pressure Range:
30-120 PSI [2-8 bar]
Temperature Range:
-20°-180°F [-28°-80°C]
Side Play:
± 0.001 [0.03 mm]
Repeatability from center:
± .002 [0.06 mm]
Loading Capacity: Static – Dynamic
Max Tensile T
400 lbs 50 lbs
[1780 N] [222 N]
Max Compressive C
750 lbs 50 lbs
[3336 N] [222 N]
Max Moment Mx
300 in/lb 50 in/lb
[34 Nm] [5.6 Nm]
Max Moment My
300 in/lb 50 in/lb
[34 Nm] [5.6 Nm]
Max Moment Mz
300 in/lb 50 in/lb
[34 Nm] [5.6 Nm]
Material: High Strength, Hard Coated aluminum
bronze alloys, Steel
Weight: 11 oz. [311 g]
Piston Diameter: 1.25 in [31.75 mm]
