AGP-23 T-Slot Bearing Three Jaw Parallel Gripper
Features & Benefits
- Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
- High gripping force to weight ratio.
- True Parallel jaw motion for easy tooling.
- Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
- Piston seals are quad-ring type for long service life.
- Hall effect sensors are available to monitor open and closed position of the jaws.
- AGP is fully field repairable for cost savings and minimum down time.
- Optional Stripper plate ensures part preload in location upon release.
PRODUCT SPECIFICATIONS
Design: Parallel, Double Acting, Synchronized Jaws
Stroke: .30 in [7.6mm]
Gripping Force @ 80 PSI [5.5 BAR]
Closing: 29 lbs [129 N]
Opening: 26 lbs [115 N]
Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]
Pressure Range:
Low/High 30-120 PSI [2-8 BAR]
Temperature Range:
Low/High -20°/180°F [-28°/80°C]
Side Play:
± 0.001 [.03 mm]
Repeatability from Center:
± 0.002 [.06 mm]
Loading Capacity: Static – Dynamic
Max Tensile T
300 lbs 100 lbs
[1300 N] [444 N]
Max Compressive C
300 lbs 100 lbs
[1300 N] [444 N]
Max Moment Mx
250 in/lb 75 in/lb
[2.8 Nm] [8.5 Nm]
Max Moment My
250 in/lb 75 in/lb
[2.8 Nm] [8.5 Nm]
Max Moment Mz
150 in/lb 75 in/lb
[17 Nm] [8.5 Nm]
Material: High Strength,Hard Coated aluminum bronze alloys, Steel
Weight: 9 oz [255 g]
Piston Diameter: 1.25 in [32 mm]
