AGP-83 Three Jaw Parallel Gripper
T-Slot Bearing Series

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel- Double Acting
Synchronized Jaws

Stroke: .88 in

Gripping Force @ 80 PSI
Closing: 280lbs per jaw
Opening: 285 lbs per jaw

Time:
Close: 0.22 sec
Open: 0.22 sec

Pressure Range:
Low: 30 PSI
High: 150 PSI

Temperature Range:
Low: -20°F
High: 180°F

Side Play: ± 0.001

Repeatability from center: ±.002

Loading Capacity: Static Dynamic
Maximum Tensile T
...... 2100 lbs 760lbs
Maximum Compressive C
... 2100lbs 760 lbs
Maximum Moment Mx
..... 2100 in/lb 760 in/lb
Maximum Moment My
..... 2100 in/lb 760 in/lb
Maximum Moment Mz
..... 1600 in/lb 550 in/lb

Displacement 7.4 cu in

Material:
High Strength,
Hard Coated aluminum
bronze alloys, Steel

Weight: 6.0 lbs.

Piston Diameter: 3.5 in

• Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  
• High gripping force to weight ratio
  
• Compact design with long stroke
  
• True parallel jaw motion for easy tooling
  
• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations..
  
• Pistons seals are quad ring type for long service life.
  
• Hall effect sensors are available to monitor open and closed position of the jaws.
  
• AGP is fully field repairable for cost savings and minimum down time
  
• Multiple mounting surfaces on jaw for easy tooling.
  
• Optional stripper plate ensures part preload in location upon release.