AGPT-500 T-Slot Bearing Series

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: 0.5 Inches

Gripping Force per Jaw @ 80psi: Closing = 10 lbs.; Opening = 12 lbs.

Time: Close = 0.12 sec.; Open = 0.12 sec.

Pressure Range: Low = 10 psi; High = 120 psi

Temperature Range: Low = -20 F; High = 180 F

Side Play: +/- 0.001"

Loading Capacity:
Maximum Tensile T..........60 lbs.
Maximum Comressive C...60 lbs.
Maximum Moment Mx......60in/lb
Maximum Moment My......60in/lb
Maximum Moment Mz......60in/lb

Material: High strength, hard coated aluminum alloys and steel

Displacement: 0.10 cubic inch

Material: High strength, hard coated aluminum alloys and steel

Weight: 5 Oz.

Piston Diameter: 0.625 Inches

• Jaws are T-Slot bearing supproted to prevent jaw breakage and offer superior load bearing performance.
  
• High gripping force to weight ratio.
  
• Compact design with long stroke.
  
• True parallel jaw motion for easy tooling.
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
• Piston seals are quad ring type for long service life.
  
• Proximity switches are available to monitor open and closed position of the jaws.
  
• Series AGLP-500 are fully field repairable for cost savings and minimum down time.
  
• Linkage is guided in the body for precise center repeatibility.