AGLP-8-500 T-Slot Bearing Series Parallel Gripper
Features & Benefits
- Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
- Rugged rack and pinion synchronizing.
- High gripping force to weight ratio.
- Compact Design with long stroke.
- True parallel jaw motion for easy tooling.
- Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
- Piston seals are quad ring type for long service life.
- Hall effect sensors are available to monitor open and closed positions of the jaws.
- AGLP is fully field repairable for cost savings and minimum down time.
- Gripper can be ordered with 3 different stroke on the same size body.
PRODUCT SPECIFICATIONS
Design: Parallel, Double Acting, Synchronized Jaws
Stroke: 0.50 in [12.7 mm] 1.00 in [25.4 mm] 1.50 in [38.1 mm]
Gripping Force @ 80 PSI [5.5 BAR]
Closing: 45 lbs [200 N]
Opening: 45 lbs [200 N]
Time:
Close: 0.2 sec [0.2 sec]
Open: 0.2 sec [0.2 sec]
Pressure Range:
Low/High 10-120 PSI [.7-7 BAR]
Temperature Range:
Low/High -20°/180°F [-28°/80°C]
Side Play: ± 0.001 [.03 mm]
Loading Capacity: Static – Dynamic
Max Tensile T
165lbs 55 lbs
[734 N] [245 N]
Max Compressive C
165 lbs 55 lbs
[734 N] [245 N]
Max Moment Mx
100 in/lb 33 in/lb
[11.3 Nm] [3.7 Nm]
Max Moment My
125 in/lb 42 in/lb
[14.1 Nm] [4.7 Nm]
Max Moment Mz
100 in/lb 33 in/lb
[11.3 Nm] [3.7 Nm]
Material: High Strength,Hard Coated aluminum bronze alloys, Steel
Weight: 2 lb [.90 kg]
Piston Diameter: 1.250 in [31.7 mm]