AGPM-1 Miniature T-Slot Bearing Series Parallel Gripper

Features & Benefits

Jaws are T-Slot Bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
Piston seals are quad ring type for long service life.
AGPM-1 is fully field repairable for cost savings and minimum down-time.
Wedge is guided in the body for precise center repeatability.
Shielded design for long service life.

Design/Model

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 0.190 in [4.8 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 9 lbs [40 N]
Opening: 9 lbs [40 N]

Time:
Close: 0.10 sec [0.10 sec]
Open: 0.10 sec [0.10 sec]

Pressure Range:
Low/High 10-100 PSI [.7-7 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Repeatability from center: ± .002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
20 lbs 7 lbs
[88 N] [31 N]

Max Compressive C
20 lbs 7 lbs
[88 N] [31 N]

Max Moment Mx
12 in/lb 4 in/lb
[1 Nm] [.5 Nm]

Max Moment My
15 in/lb 5 in/lb
[2 Nm] [.6 Nm]

Max Moment Mz
12 in/lb 4 in/lb
[1 Nm] [.5 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 1.7 oz. [48.1 g]

Piston Diameter: .437 in [11 mm]