AGPT-1125 T-Slot Bearing Series

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: 1.125 Inches

Gripping Force per Jaw @ 80psi: Closing = 30 PSI.; Opening = 27 PSI

Time: Close = 0.20 sec.; Open = 0.20 sec.

Pressure Range: Low = 10 psi; High = 120 psi

Temperature Range: Low = -20°F; High = 180°F

Side Play: +/- 0.001"

Repeatability from center: +/- 0.0005 in

Loading Capacity:
Maximum Tensile T..........100 lbs.
Maximum Comressive C...100 lbs.
Maximum Moment Mx......200in/lb
Maximum Moment My......200in/lb
Maximum Moment Mz......200in/lb

Displacement: 0.50 cu in

Material: High strength, hard coated aluminum alloys and steel

Weight: 1 Oz.

Piston Diameter: 1.00 Inch

• Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  
• High gripping force to weight ratio.
  
• True parallel jaw motion for easy tooling.
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
• Piston seals are quad ring type for long service life.
  
• Proximity switches are available to monitor open and closed position of the jaws.
  
• Series AGLP-1000 are fully field repairable for cost savings and minimum down time.
  
• Shielded design for long service life.