AGPT-1125 T-Slot Bearing Series

Features & Benefits

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad ring type for long service life.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGLP-1125 are fully field repairable for cost savings and minimum down time.
Shielded design for long service life.

Measurement Type

Sensor Options

Sensor Type

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 1.125 in [28.6 mm]

Gripping Force Per Jaw @ 80 PSI [5.5 BAR]
Closing: 30 PSI [133 N]
Opening: 27 PSI [120 N]

Time:
Close: 0.20 sec [0.20 sec]
Open: 0.20 sec [0.20 sec]

Pressure Range:
Low/High 10-120 PSI [.7-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.001 [.03 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
100 lbs 30 lbs
[444 N] [133 N]

Max Compressive C
100 lbs 30 lbs
[444 N] [133 N]

Max Moment Mx
200 in/lb 25 in/lb
[22.6 Nm] [5.6 Nm]

Max Moment My
250 in/lb 30 in/lb
[28 Nm] [6.7Nm]

Max Moment Mz
200 in/lb 25 in/lb
[22.6 Nm] [5.6 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 1 lb. [.5 kg]

Piston Diameter: 1.00 in [25.4 mm]