AGP-63 T-Slot Bearing Three Jaw Parallel Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: .62 in [15.7 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 200 lbs [889 N]
Opening: 194 lbs [862 N]

Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static - Dynamic

Max Tensile T
1250 lbs 400 lbs
[5560 N] [1780 N]

Max Compressive C
1250 lbs 400 lbs
[5560 N] [1780 N]

Max Moment Mx
1000 in/lb 400 in/lb
[112 Nm] [45 Nm]

Max Moment My
1000 in/lb 400 in/lb
[112 Nm] [45 Nm]

Max Moment Mz
1000 in/lb 300 in/lb
[112 Nm] [33.9 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 2.3 lbs [1 kg]

Piston Diameter: 2.75 in [69.8 mm]

• Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  
• High gripping force to weight ratio.
  
• Compact design with long stroke.
  
• True Parallel jaw motion for easy tooling.
  
• Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  
  
• Piston seals are quad-ring type for long service life.
  
  
• Hall effect sensors are available to monitor open and closed position of the jaws.
  
  
• AGP is fully field repairable for cost savings and minimum down time.
  
• Multiple mounting surfaces on jaw for easy tooling.
  
  
• Optional Stripper plate ensures part preload in location upon release.