AGPM-1 Miniature T-Slot Bearing Series
Parallel Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 0.190 in [4.8 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 9 lbs [40 N]
Opening: 9 lbs [40 N]

Time:
Close: 0.10 sec [0.10 sec]
Open: 0.10 sec [0.10 sec]

Pressure Range:
Low/High 10-100 PSI [.7-7 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Repeatability from center: ± .002 [.06 mm]

Loading Capacity: Static - Dynamic

Max Tensile T
20 lbs 7 lbs
[88 N] [31 N]

Max Compressive C
20 lbs 7 lbs
[88 N] [31 N]

Max Moment Mx
12 in/lb 4 in/lb
[1 Nm] [.5 Nm]

Max Moment My
15 in/lb 5 in/lb
[2 Nm] [.6 Nm]

Max Moment Mz
12 in/lb 4 in/lb
[1 Nm] [.5 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 1.7 oz. [48.1 g]

Piston Diameter: .437 in [11 mm]

• Jaws are T-Slot Bearing supported to prevent jaw breakage and offer superior load bearing performance.
  
  
• High gripping force to weight ratio.
  
  
• True parallel jaw motion for easy tooling.
  
  
• Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
  
  
• Piston seals are quad ring type for long service life.
  
  
• AGPM-1 is fully field repairable for cost savings and minimum down-time.
  
  
• Wedge is guided in the body for precise center repeatability.
  
• Shielded design for long service life.