AGR-1 Rotary Actuator

Inch & Metric DWG 2D	PRODUCT PORTFOLIO	Inch Solid Works, 3D IGES, Step	Metric Solid Works, 3D, IGES & Step	PDF
DWG	AGR-1	3D	3D	AGR-1

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Rack and Pinion with Flange Hard Stop

Rotation Range: 0º-180º (Adj. +/- 5º)

Payload: 1 lb central to axis of rotation [.44 Kg]

Torque:
@80 psi [5.5 BAR] 5 in/lb [.56 Nm]

Bearing Load:
Dynamic 198 lbs [880 N]
Static 385 lbs [1620 N]

Rotation Time: No load .1 second

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Backlash: Zero

Accuracy: .001 concentric and perpendicular to axis of rotation

Material: High Strength,Hard Coated Aluminum Alloys, Steel

Weight: 7 oz [198 g]

Piston Diameter: (2x) .5 in [12.7 mm]

Built-in adjustable hardstops on output flange stop against a dowel pin embedded in the body to prevent pinion breakage and give accurate specific rotation requirements.
Two large bearings, one on either side of the pinion, provide for steady output flange with high loading capacity.
Ultra high torque-to-weight ratio for faster cycle times.
Compact body design to fit in tight space applications.
Units are permanently lubricated for non-lube air operation, allowing for compliance with OSHA regulations.
All rotary units have zero backlash at either end of rotation, keeping the output flange against the hardstop.
Built-in adjustable flow controls allow for maximum cycle times and smooth deceleration.
Proximity switches are available to monitor end of rotation.
The AGR-1 unit is fully field repairable for cost savings and minimum down time.