AGLP-16-2000 T-Slot Bearing Series Parallel Gripper
Features & Benefits
- Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
- Rugged rack and pinion synchronizing.
- High gripping force to weight ratio.
- Compact Design with long stroke.
- True parallel jaw motion for easy tooling.
- Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
- Piston seals are quad ring type for long service life.
- Hall effect sensors are available to monitor open and closed positions of the jaws.
- AGLP is fully field repairable for cost savings and minimum down time.
- Gripper can be ordered with 3 different stroke on the same size body.
PRODUCT SPECIFICATIONS
Design: Parallel, Double Acting, Synchronized Jaws
Stroke: 2.00 in [50.8 mm]
Gripping Force @ 80 PSI [5.5 BAR]
Closing: 120 lbs [533 N]
Opening: 120 lbs [533 N]
Time:
Close: 0.25 sec [0.2 sec]
Open: 0.25 sec [0.2 sec]
Pressure Range:
Low/High 10-120 PSI [.7-7 BAR]
Temperature Range:
Low/High -20°/180°F [-28°/80°C]
Side Play: ± 0.001 [.03 mm]
Loading Capacity: Static – Dynamic
Max Tensile T
310lbs 103 lbs
[1000 N] [333 N]
Max Compressive C
310 lbs 103 lbs
[1000 N] [333 N]
Max Moment Mx
785 in/lb 262 in/lb
[88.7 Nm] [29.6 Nm]
Max Moment My
940 in/lb 313 in/lb
[106.2 Nm] [35.3 Nm]
Max Moment Mz
785 in/lb 262 in/lb
[88.7 Nm] [29.6 Nm]
Material: High Strength,Hard Coated aluminum bronze alloys, Steel
Weight: 8 lb [3.62 kg]
Piston Diameter: 2.00 in [50.8 mm]