Home » Products » Pneumatic Grippers » 2-Jaw Parallel Pneumatic Grippers » AGP-83 Three Jaw Parallel Gripper T-Slot Bearing Series

AGP-83 Three Jaw Parallel Gripper T-Slot Bearing Series

Features & Benefits

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio
Compact design with long stroke
True parallel jaw motion for easy tooling
Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations..
Pistons seals are quad ring type for long service life.
Hall effect sensors are available to monitor open and closed position of the jaws.
AGP is fully field repairable for cost savings and minimum down time
Multiple mounting surfaces on jaw for easy tooling.
Optional stripper plate ensures part preload in location upon release.

Size

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: .88 in [22.3 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 280 lbs [1245 N]
Opening: 285 lbs [1267 N]

Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
2100 lbs 760 lbs
[9300 N] [3380 N]

Max Compressive C
2100 lbs 760 lbs
[9300 N] [3380 N]

Max Moment Mx
2100 in/lb 760 in/lb
[237 Nm] [85.8 Nm]

Max Moment My
2100 in/lb 760 in/lb
[237 Nm] [85.8 Nm]

Max Moment Mz
1600 in/lb 550 in/lb
[180 Nm] [62.1 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 6.0 lbs [2.7 kg]

Piston Diameter: 3.5 in [89 mm]