Home » Products » Pneumatic Grippers » AGPT-1000 T-Slot Bearing Series
Agpt-1000

AGPT-1000 T-Slot Bearing Series

Features & Benefits

  • Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  • High gripping force to weight ratio.
  • Compact design with long stroke.
  • True parallel jaw motion for easy tooling.
  • Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
  • Piston seals are quad ring type for long service life.
  • Proximity switches are available to monitor open and closed position of the jaws.
  • Series AGLP-1000 are fully field repairable for cost savings and minimum down time.
  • Linkage is guided in the body for precise center repeatability.

DOWNLOAD PRODUCT PDF
DOWNLOAD CAD FILE

PRODUCT SPECIFICATIONS

Parallel Gripper

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 1.0 in [25.4 mm]

Gripping Force Per Jaw @ 80 PSI [5.5 BAR]
Closing: 15 PSI [67 N]
Opening: 17 PSI [75 N]

Time:
Close: 0.20 sec [0.20 sec]
Open: 0.20 sec [0.20 sec]

Pressure Range:
Low/High 10-120 PSI [.7-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.001 [.03 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
60 lbs 20 lbs
[266 N] [88.9 N]

Max Compressive C
60 lbs 20 lbs
[266 N] [88.9 N]

Max Moment Mx
100 in/lb 25 in/lb
[11.3 Nm] [2.8 Nm]

Max Moment My
120 in/lb 30 in/lb
[13.5 Nm] [3.4Nm]

Max Moment Mz
100 in/lb 25 in/lb
[11.3 Nm] [2.8 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 8 oz [226 g]

Piston Diameter: 0.75 in [19 mm]

3-D Interactive Preview